Geotextile
Degradation in breaking strength
Five geotextile specimens in machine and five in cross-machine direction are exposed in a Xenon arc device for each of the following times: 0, 150, 300 and 500 hours. Exposure consists of 120 minute cycles as follows: 90 minutes of light only at 65 °C uninsulated black panel temperature and 50% relative humidity followed by 30 minutes of light plus water spray. After each exposure period is complete, specimens are exposed to a strip tensile test. The average breaking strength in each direction is compared to that of the original control specimens. The percent strength retained is plotted to produce a degradation curve.
5 machine direction 5 cross machine direction
2" x 6"
Xenon, arc, UV, light degradation, deterioration
Atlanta
770.645.6575
Boston
978.635.0424
Chicago
224.676.1371
New York
212.566.6630
info@geotesting.com